Kline Production Tools
Logan Kline Tools also manufactures products for many uses other than well servicing, including isolation packers for production and disposal wells, tubing anchors, and a variety of special use valves. These are designed and constructed with the same high standards as our service tools.
KS1-XW Packer meets the requirements for production, stimu-lation, and injection applications. The full-opening design provides unrestricted flow and allows wireline tools to pass. Mechanical lock-setting action holds substantial pressures from above or below without tubing weight or tension. A large internal bypass reduces the swabbing effect when running or retrieving. The bypass closes when the packer is set and opens before releasing the upper slips to allow for pres-sure equalization.
The Logan Kline Tools KS-3 Packer is a single-grip packer without an upper hold-down device for use in wells that contain negligible differential pressure from below. The tool is set by a quarter-turn to the right at the packer then compression-set with set down weight. The packer is released by straight pickup and features a large bypass area in order to prevent swabbing of elements during run-in and retrieval.
Anchor Catcher (Lockdown) - LDAC
The Logan Kline Tools Anchor Catcher (Lockdown) is set and released with only right hand rotation. One quarter turn right hand rotation at the tool is used to set or release. Once set, the tubing string can be landed in tension to facilitate rod pumping operations, and vertical movement of the tubing string is eliminated.
- Optional No-Torque slip available to prevent rotation when used with a progressive cavity pump
- Wickered or Carbide slips available
- Emergency shear release is adjustable
- Stainless steel drag springs
Anchor Catcher (Lockdown) - LDAC - HD
The Logan Anchor Catcher (Lockdown) HD showcases the same quality and performance of our LDAC, but with a higher tensile rating on the inner mandrel. This higher tensile rating allows for extended tailpipe options for deepwell applications.
- Offers higher tensile rating on inner mandrel for deepwell applications
- Retains same functionality and bypass area
Hydraulic Tandem Packer
The Logan Kline Tools Hydraulic Tandem Packer is designed for isolation of several zones for waterflood and remedial work. One or more may be run above or below a tension or compression set packer.
Big Bore Tubing Packer
The Logan Kline Tools Big Bore Tubing Packer is designed to provide a leak-free seal inside a tubing string with a bore larger than other tubing packers. It can run as a tension packer or a "hook wall" compression packer. It has left-hand safety threads at each end in case it becomes stuck.
Scab Liner Assembly
Logan Kline Tools' Scab Liner Assembly is an economical method of isolating casing leaks or existing perforations in producing and injection wells. It can eliminate repetitive squeezing and the need to install a full liner. This assembly is fully retrievable and incorporates a unique design with large bore sizes that enable standard tubing to run through the liner.
Logan Kline Tools' Tubing Anchor/Catcher is a rugged anchor that employs drag blocks (rather than drag springs) and fully enclosed large cross-section slips for maximum safety. It has a tension shear release that is easily adjustable in the field.
Dual String Anchor
Logan Kline Tools' Dual-String Anchor provides a means of anchoring the second or short tubing string in a dual completion. It consists of two parts:
An anchor body with long-string connection threads on one side, top, and bottom, and a short-string receptacle with J-lugs on the opposite side.
A short-string latch with J-slots on the bottom and short-string connection threads on the top.
Downhole Swivel Joint
The Logan Kline Tools Downhole Swivel Joint allows rotation of the tubing string even when the section below is stuck. Thrust bearings are incorporated in the joint to reduce friction when the tubing is in tension or compression during rotation.
Hydraulic Tubing Drain
Logan Kline Tools’ Hydraulic Tubing Drain is designed to provide a means of equalizing pressures between the tubing and annulus by simply over-pressurizing the tubing string to a pre-set point. When the pre-set point is reached, a set of shear pins will break and the external sleeve will move down to uncover the ports in the inside nipple.